Skip to content
KeevoroKeevoro

What's new

Every change you would notice, in plain words, newest first. Keevoro is in beta and changes often.

The Mac version is updated at milestones; versions marked "Also on Mac" had a Mac download.

Version 0.29.0

17 November 2026

Added

  • A backup can go to more than one place. On the backup screen, "Add another destination" adds a second (or third) place beside the first: any mix of folders, drives, Cloudflare R2, Amazon S3 and other storage. "Back up now" sends to each in turn. A new destination starts empty and catches up on the next backup; nothing already sent elsewhere is sent again.
  • Each destination shows its own count. With more than one, the screen lists them, each with how many files are there and how many are waiting, and a Remove button. Removing one only takes it off the backup's list. Nothing stored there is deleted.
  • If one destination cannot be reached, the others still get their backup. An unplugged drive or a dropped connection is reported by name and passed over; it catches up next time.

Changed

  • A photo counts as safe only when it is at every destination. With one destination this is as before. With several, a photo that has reached one but not another is still shown as waiting, so a second copy that is half made is never mistaken for a whole one.
  • After changing where a backup goes, the counts are honest. Before, a backup that was pointed somewhere new still showed everything as safe, because it had once been sent somewhere. It now counts what is at the destinations it has today.
  • "Check they all arrived" checks every destination, and each earlier backup in the history is listed with the destination it went to.

Removed

  • The downloads badge on the project page. It counted every file fetched from every release, including the fetches Keevoro's own release process makes, so the figure said nothing true about how many people use it.
See this release on GitHub

Version 0.28.0

17 November 2026

Added

  • A backup's figures in plain sight. The Choose screen and the backup screen now open with large figures: how many photos and videos you are keeping and their size, how many duplicates were left out with the room that saves and what share of everything found they were, and how many pictures were set aside. Clicking the duplicates or set-aside figure opens its list.
  • Where each earlier backup went. "How earlier backups went" has a new Where column, so after changing a backup's destination you can still see where the earlier ones were sent.

Changed

  • What a backup said when it finished stays on screen. The summary at the end of a backup (how many files, the previews, how long it took and the speed) used to vanish as soon as you looked at another screen. It is now kept with the backup and shown until the next backup replaces it, even after closing Keevoro. Changing the destination clears it, since it was about the old one.
  • The duplicates list says how much room was saved.
See this release on GitHub

Version 0.27.2

17 November 2026

Changed

  • Click a picture to open it; double-click to keep or leave it out. Inside a collection, a single click now opens a photo or video large, as you would expect. To keep it or leave it out, double-click it or click the tick in its corner. Before, a click changed the tick and you had to hold down to look. The line under the heading says how it works now. In the large view the Keeping switch, the arrows and Escape work as before.
See this release on GitHub

Version 0.27.1

17 November 2026

Changed

  • A file already at the destination is fingerprinted before it counts. When a backup to a folder or drive found a file of the same name and size already there, Keevoro took it to be the same file. It now reads that file and compares its fingerprint. If it is a different file, yours is reported as not backed up, and what is there is left alone.
  • Files that could not be read are said on screen. After looking through a source, Keevoro now says how many files it could not read and names the first few. They used to be listed only in the log.
  • The promises on the About page say exactly what Keevoro does. Each was checked against the code. Four were worded more strongly than was true and have been made exact: which copies are read back and compared, that it is originals that are never replaced (previews and the list of contents are rewritten), where unreadable files are reported, and what Keevoro keeps on this computer.
See this release on GitHub

Version 0.27.0

17 November 2026

Added

  • Back up the originals alone. The backup screen has a new switch, "Also make previews for a gallery". It is on to begin with. Switch it off and only your original files are backed up, exactly as they are, with no thumbnails or other versions made, which is quicker. Switch it back on later and the previews are added then. Each backup remembers its own choice.
  • An About page, with what Keevoro promises. "About Keevoro" in the side bar opens a page headed "Your photos are safe with Keevoro". It sets out the rules Keevoro never breaks: your sources are only ever read, a copy only counts when it is proved exact, nothing in a backup is ever replaced or removed, duplicates are exact, nothing is hidden, you never need Keevoro to get your photos back, and your photos go only where you send them. The page also has the origin of the name and the licence, with buttons to read the licence, the note on the name and logo, and the source.
  • A progress bar for every step of a backup. The bar used to show only while original files were going, and vanished while previews were made and sent. There is now always a bar, counting files when it cannot count bytes.
  • The file just backed up is named. Under the progress, "Just done:" shows the file Keevoro has just dealt with, so you can see what is going by.

Changed

  • Every copy written to a folder or drive is read back and proved exact. When Keevoro backs a file up to a folder, it now fingerprints what it reads from your source, writes it, makes sure it is on the disk, reads it back and fingerprints it again. If either does not match the fingerprint taken when the file was found, the copy is thrown away, the file is reported, and it is tried again next time. This makes backups to a folder somewhat slower, because each file is read back once. Backups to cloud storage are unchanged.
  • Several files at once to a network drive. A backup to a folder on a file share, such as a mapped drive letter that is really storage elsewhere, now sends four files at a time, which is much quicker for many small files. A disk in the computer still gets one at a time. This is worked out on Windows; on a Mac a network folder is still treated as a disk.
  • "Your sources are only ever read" has moved from the bottom of the side bar to the About page, where it is explained properly.
See this release on GitHub
Earlier versions (36)

Version 0.26.1

17 November 2026

Changed

  • Smoother graphs. The graphs on "What Keevoro is doing" jumped up and down like a saw, even when Keevoro was working steadily, because the computer reports what a program has read and written in lumps. Each point is now the average of the last five seconds, so a steady 8 MB/s looks steady. The line under each graph says so.
See this release on GitHub

Version 0.26.0

17 November 2026

Added

  • One button to pick up new photos. Under "Your sources" there is now "Look again for new photos". It looks through every source of the backup again, one after another, and the next backup sends only what is new.

Changed

  • Backing up to cloud storage is several times quicker for many small files. Keevoro sent one file at a time and waited for the far end to answer before starting the next, which is slow when there are thousands of small previews. It now sends six at a time to Cloudflare R2, Amazon S3 and the like. Backups to a folder or a drive still go one at a time, where sending several only makes the disk work harder. Stop and Pause let the files already on their way finish.
See this release on GitHub

Version 0.25.0

17 November 2026

Added

  • Find the folders with photos, in seconds. Not sure where on a drive your photos are? Choose the whole drive and pick "Find the folders with photos". Keevoro reads only the list of what is in each folder, never opening a file, so it gets through hundreds of thousands of files in a few seconds. It then shows the folders that seem to hold photos and videos, with how many and how big, each with a tick. Tick the ones you want and Keevoro looks through those properly, one after another.
  • Probable icons are spotted. A folder of very small pictures with no videos is marked "Small pictures, probably not photos" and left unticked, so a program's own pictures do not sneak in.
  • What Keevoro is doing, in plain words, at a glance. The side bar now says what Keevoro is busy with on every screen, under "What Keevoro is doing": for example "Making previews" or "Backing up your files and making thumbnails". Nothing is shown when it is idle.
  • More kinds of work are named. "What Keevoro is doing" now also names making previews, making video previews, making thumbnails for the screen you are on and finding where your photos are, each with a sentence on why and what it costs your computer.
  • Keep all or keep none inside a collection. Two buttons at the top of a collection keep or leave out everything in it at once.
  • See where a collection came from. The folder, or folders, its files are in on your source are named at the top of a collection. Click one to open it.
  • keevoro survey on the command line. The same quick survey, for those who prefer a terminal.

Changed

  • Back takes you back to where you were. Coming back from a collection, the duplicates list, Settings or "What Keevoro is doing" returns to the same place on the screen, not the top.
  • The top line of "What Keevoro is doing" says what, not just that it is working.

Fixed

  • Opening a collection could show a different one. When photos from two separate occasions in the same month were both titled, say, "October 2004", opening either showed the first, and "Don't keep" on one could act on the other. Each now opens and keeps its own. Where two share a month they are named to the day, such as "2 to 3 October 2004" and "20 October 2004".
See this release on GitHub

Version 0.24.0

17 November 2026

Added

  • Hold down on a picture to see it larger. Inside a collection, or in the set-aside list, press and hold on any photo or video (or right-click it) and it opens screen-sized, without changing whether it is kept. From there you can leave it out or put it back, move to the next and previous with the arrow keys or the buttons, and close with Escape. A quick click still ticks and unticks as before. A video shows a still from it. The line under the heading now says so: "Hold down on one to see it larger."
  • About Keevoro. Settings now says where the name comes from: the sound of English "keep" with "voro", an old Swedish word meaning "were". Keep things as they were.

Changed

  • Mac and Linux versions come at milestones for now. While Keevoro is changing quickly, each release is built for Windows only, and Mac and Linux versions are made at bigger milestones. A Mac that has Keevoro is not offered an update it cannot install.
  • Pictures on their way show a shimmer. A thumbnail that has not arrived yet used to be a blank tile, which looked as if nothing was happening. It now shimmers gently until the picture appears.
See this release on GitHub

Version 0.23.0

17 November 2026Also on Mac

Added

  • Every backup explains itself. Keevoro now writes a plain note, "What is in this backup.txt", into the place it backs up to. It says what each folder is for: originals (your photos and videos, untouched), renditions (smaller versions made for looking at, with what thumb, display, poster and video each mean) and index (the list a gallery reads). It also says how to get your photos back without Keevoro.
  • The same explanation in the app. The backup screen has a new "What is in the backup" line to open.
  • Look at the duplicates before you back up. On the Choose screen, "N duplicates will be kept only once" now opens a list of every file found more than once. For each it shows the copy being kept and the folder it is in, and each copy left out and where that is. Click a folder to open it and see for yourself.
  • How Keevoro decides, in plain words. The same screen explains that two files count as duplicates only when every byte matches, never on name, size or date, and marks any that are still being checked.

Changed

  • The folder named while searching can be read. "Now in ..." used to change many times a second, too fast to read. It now changes every second and a half at most. The count of files still moves as it happens.

Fixed

  • The main button lines up with the buttons beside it. "Back up now" sat a few pixels lower than its neighbours.
See this release on GitHub

Version 0.22.0

17 November 2026Also on Mac

Added

  • A Memory graph. "What Keevoro is doing" now charts how much memory Keevoro is holding over the last two minutes, beside Processor, Disk and Network. It should stay level, not climb.

Changed

  • Backing up large files to a folder is much faster. Any file over 64 MB going to a folder or a drive used to be written there in pieces and then written a second time to join the pieces, so a big video cost the destination twice the work. Each file is now read once and written once. Backups to cloud storage are unchanged, because there the pieces are what make a dropped connection recoverable.
  • Steadier progress on big files. The speed and time left now move every few megabytes while a large file is being written, not once per piece.
  • "Send them now" is now "Back up now". After a backup it reads "Back up again". The rest of the screen follows: the step is "Back them up somewhere safe", and it says "Backing up to the folder", "waiting to be backed up", "Back up somewhere else" and "How earlier backups went".
  • Buttons look like buttons. Check they all arrived, Show me the folder, Back up somewhere else, Stop, Cancel, Remove, File types, Start a new backup and Open the log file were drawn as plain text. They are now proper buttons. Only things that take you somewhere (Back, Settings, What's new) are still drawn as links.

Fixed

  • Coming back to a running backup no longer offers to start it again. If you looked at another screen while a backup was running and came back, the screen offered to start it for a few seconds before catching up. It now shows the backup in progress, with its speed and Stop button, straight away.
  • A backup that finished while you were on another screen is counted. Coming back used to say every file was still waiting, although they had all arrived. The counts are now read again whenever a backup ends, whichever screen is showing.
See this release on GitHub

Version 0.21.0

17 November 2026Also on Mac

Added

  • A Speed setting. Settings has a new switch, "Use this computer's own picture codecs", which is on unless you turn it off. Beneath it Keevoro says which ways of opening a photo it will try, in order, and how many previews it makes at once.

Changed

  • Previews are made much faster. Keevoro now makes several previews at a time instead of one after another. It uses half of your processor cores at most, and never more than four, so the computer stays free for you. Pause still stops them.
  • On Windows, photos are opened by Windows itself. The codecs built into Windows are usually quicker than Keevoro's own decoder and use your graphics hardware where they can. If a photo will not open that way, Keevoro quietly uses its own decoder instead, so nothing is lost by leaving the switch on.
  • More kinds of photo get a preview on Windows. HEIC photos from phones, and camera raw files Windows has a codec for, now get a real preview where before they had a placeholder. Your original files are sent exactly as they are either way.
See this release on GitHub

Version 0.20.0

17 November 2026Also on Mac

Added

  • See how fast a send is going. While files are being sent, the Send screen shows how much has gone out of how much, the speed, and roughly how long is left: "9.6 GB of 30.1 GB sent at 12.4 MB/s, about 28 minutes left". The speed is steadied over the last few seconds, and no time is guessed while nothing is arriving.
  • A summary when a send finishes. It says how long it took, how much was sent and the average speed over the whole send.
  • How earlier sends went. Each backup keeps a record of its last twenty sends. On the Send screen, "How earlier sends went" lists when each finished, how much it sent, how long it took and its average speed, so one can be compared with another.
  • A Network graph. "What Keevoro is doing" now also charts what Keevoro is sending to cloud storage each second. Sending to a folder shows under Disk, since it does not use the network.
See this release on GitHub

Version 0.19.0

17 November 2026Also on Mac

Added

  • See what Keevoro is doing, and why. A new page, "What Keevoro is doing" at the bottom of the side bar, names each job in hand (looking through a source, checking for duplicates, sending your files) and says in plain words why it is doing it and what it costs your computer.
  • Graphs of how hard it is working. The same page charts Keevoro's own use of the processor and the disk over the last two minutes, with the figures now and at their highest. These are Keevoro's figures alone, not the whole computer's. Move across a chart to read any moment.
  • Pause Keevoro's work. One button makes every heavy job wait once the file in hand is finished, and "Carry on" picks up exactly where it left off, with nothing lost or done twice. Use it when you need the computer for something else or are on battery. While paused, the side bar says so on every screen.
See this release on GitHub

Version 0.18.0

17 November 2026Also on Mac

Added

  • Choose which kinds of file to include, source by source. For people who want it, each source now has a quiet "File types" link. It shows the kinds of file Keevoro found there (JPG, DNG, MP4 and so on) with how many and how big, and a switch for each. Switch one off and every file of that kind on that source is left out of the backup; nothing on the source is changed, and the choice is remembered if you look through the source again. Everything is included unless you say otherwise, and adding a source is still one click.

Changed

  • The Choose screen says why there is more than one collection. Keevoro sorts what it finds into collections by folder name, or by month where folders have no names, so one source often makes several. The screen now says so.

Fixed

  • Camera raw files are no longer set aside. DNG files, and the raw files of other cameras, were being put in "pictures that don't look like photos" as tiny images. The size written at the start of a raw file is that of its small built-in preview, not of the photo, and Keevoro was taking it at face value. Raw files are now always treated as the photos they are. Any that were wrongly set aside are put back the next time you open Keevoro; you do not need to look through the source again.
See this release on GitHub

Version 0.17.0

17 November 2026Also on Mac

Added

  • Each source shows how big it is. The list of sources now gives the size of what was found on each, in MB or GB, beside the number of photos and videos.

Changed

  • The bar with the next step is fixed to the bottom of the window. It used to float over the page as a rounded card. It now runs along the bottom edge, full width, and stays there whether the page is long or short.
See this release on GitHub

Version 0.16.0

17 November 2026Also on Mac

Added

  • Stop a search. While Keevoro is looking through a source there is now a "Stop looking" button. It stops within a moment. Nothing from a stopped search is added, because only part of the source had been looked at; whatever Keevoro already knew about that source stays as it was, and you can choose it again whenever you like.
See this release on GitHub

Version 0.15.0

17 November 2026Also on Mac

Added

  • Reset Keevoro. Settings has a new "Start again" section that puts Keevoro back as it was when first installed. It removes your backups from Keevoro (with what each found and what you chose), the previews it made and any storage keys it saved. It never touches your sources or anything you have already sent: those stay exactly where they are. It asks first and says all of this before doing anything.
See this release on GitHub

Version 0.14.1

17 November 2026Also on Mac

Fixed

  • The index in a folder no longer spells out where the folder is. When you send to a folder, the list of what was sent (in its index folder) used to contain the folder's full location for every file, such as file:///Z:/Backups/.... It now points to each file relative to itself. So the folder can be moved to another disk or drive letter and the list still works, and it no longer records how your disks are laid out. Folders you have already sent to are put right the next time you send to them.
See this release on GitHub

Version 0.14.0

17 November 2026Also on Mac

Added

  • Keevoro tells you how much room your files need. Before you choose where to send them it says how many files there are and how big they are in all. Once you have chosen a folder it compares that with the free space on that disk, and says so either way.
  • A disk without enough room is refused before anything is sent. If the files will not fit, Keevoro says how much is needed and how much is free, and Send waits until there is room or you choose somewhere else. You no longer find out halfway through.
  • Stop a send. While files are being sent there is a Stop link. The file in hand is finished, nothing is left half-sent, and everything already sent stays where it is. Send again later and it carries on from there.
  • Folder names open the folder. Wherever Keevoro names a folder (where a backup sends to, each source, the backup's own folder in Settings) you can click the name to open it.

Changed

  • Your files are sent first, previews afterwards. Sending used to make a preview of every photo before the first file moved. Now each file is read, checked and sent straight away, and the previews and the index are made and sent once the files themselves are safe. If a send is interrupted, what has arrived is your photos and videos.

Fixed

  • The main button on the Send screen looked like an ordinary button after the redesign. It is the dark main action again.
See this release on GitHub

Version 0.13.2

16 November 2026Also on Mac

Changed

  • Tidying behind the name change. Now that sessions are called backups, Keevoro's own settings file and folders use that word too. Nothing looks or works differently, and the backups you already have open exactly as before.

Fixed

  • The words on the first screen can no longer be highlighted by accident when you click or press Ctrl+A.
See this release on GitHub

Version 0.13.1

16 November 2026Also on Mac

Changed

  • Sessions are now called backups. "Family photos" and "Drone footage" are backups: the name at the top of the side bar says Backup, and you "Start a new backup". Nothing about how they work has changed, and yours are all still there.
  • Keevoro's own typeface. The app is now set in Keevoro Sans, drawn from the logo's lettering, in place of the stand-in it used before.
  • A lighter light and a softer dark. Light is now near-white with cream kept for photo mats and the step you are on, so screens feel brighter. Dark is a soft deep teal with calmer text.
  • The logo shown when the app is dark is now the design system's own reversed version.
See this release on GitHub

Version 0.13.0

16 November 2026Also on Mac

Added

  • Light, dark, or match your computer. Settings has a new Appearance choice. "Match my computer" follows whatever the rest of your computer is set to and changes with it; Light and Dark stay put. Your choice is remembered.

Changed

  • Keevoro has its own look. The app now wears the Keevoro design: the cream and deep teal of the logo, the Figtree typeface, photos shown as soft squares on a cream mat, and the real Keevoro logo in the side bar (with its cream-lettered version when the app is dark), on the first screen and as the app's icon. The fonts are built in, so it looks the same with no internet connection.
See this release on GitHub

Version 0.12.3

16 November 2026Also on Mac

Fixed

  • You can remove a source while another is being looked through. The Remove buttons were greyed out for as long as a search was running.
See this release on GitHub

Version 0.12.2

16 November 2026Also on Mac

Changed

  • Video thumbnails no longer need any extra software. Keevoro now asks the computer's own video player for a picture from each video (Media Foundation on Windows, AVFoundation on a Mac), so thumbnails and posters work on a freshly installed computer and no other program is started to make them. The picture is taken a little way into the video and found by jumping straight there, so a long video takes no longer than a short one. Videos in a format the computer itself cannot play show a plain placeholder; if ffmpeg happens to be installed it is still tried for those. Converting old videos to MP4, which only the command line offers, still uses ffmpeg.
See this release on GitHub

Version 0.12.1

16 November 2026Also on Mac

Fixed

  • No more black windows flashing up on Windows. Making a thumbnail for a video uses a helper program (ffmpeg), and each time it ran Windows opened a console window for it, so opening a collection with videos in it filled the screen with them. The helper now runs with no window at all. Keevoro also looks for it once instead of once per picture, and makes at most three previews at a time, so opening a large collection no longer slows the computer down.
See this release on GitHub

Version 0.12.0

16 November 2026Also on Mac

Added

  • Sessions. A session is one job you come back to, such as "Family photos" or "Drone footage". Each has its own sources, its own choices about what to keep and its own place to send things, and none of them affect the others. The session's name is at the top of the side bar: click it to open another or start a new one. What you already had becomes a session called "My photos", with everything it had found and chosen.
  • Come back later and send only what is new. Open a session again, look through its source again, and Send copies only the files that were not sent before.
  • Choose where your photos go from a list. A folder (on this computer, another disk or a network drive) comes first, then Cloudflare R2, Amazon S3 and other storage that works like S3. They are all the same kind of thing to Keevoro: somewhere to send your files.

Changed

  • Three steps, not four: Find, Choose, Send. There is no longer a separate "gather" step that copied everything into a library on this computer before it could go anywhere else. Files now go straight from the source to the place you chose, each one read in full and checked first, with no second copy made along the way. If you want them in a folder on this computer, choose that folder as the place to send them.
  • "Check they all arrived" replaces "Check my backup", and "Send somewhere else" replaces "Disconnect".

Removed

  • The "Gather them" step and the Keevoro Library folder in Pictures as a required stop. Photos already gathered into it stay exactly where they are. The command-line keevoro gather is unchanged.
See this release on GitHub

Version 0.11.0

16 November 2026Also on Mac

Added

  • Settings, all in one place. A Settings link at the bottom of the side bar shows where your library is (and lets you use a different folder), where it backs up to, which version you have with a "Check for updates" button, and the log.
  • A log of what Keevoro has been doing. Keevoro now keeps a plain record of every search, each large file it reads, anything it could not read, gathering and backups, with the time of each. "Show the log" in Settings displays it and "Open the log file" opens it as an ordinary text file you can send to someone. It never records keys or passwords.
  • Keevoro asks before looking through a whole disk. Choosing your computer's disk, a large external drive or a top-level folder now asks first, says it may take a while, and offers "Choose a folder inside it" as the quicker way. USB sticks and memory cards start straight away as before.
  • The search says when it is on a large file, and when it is saving. A long video can take minutes to read, during which the counts do not move; the screen now names the file and its size, and says "Saving what was found" at the end.

Changed

  • Looking through a source no longer reads every file to the end. The search now only identifies what is there (a few samples from each large file, not the whole thing), so a drive full of long videos is listed in a fraction of the time. The careful work happens afterwards, in the background, while you carry on: Keevoro reads each file fully to confirm which are true duplicates, and a quiet line in the side bar says how far it has got. Until that finishes, the duplicate count is a close estimate.
  • Gathering checks before it copies. Any file not yet fully read is read first ("checked before copying"), so a copy is still proved exact against its original and two different files are never mistaken for one. A file that cannot be read in full is reported and not copied.
See this release on GitHub

Version 0.10.0

16 November 2026Also on Mac

Added

  • See what the search is doing. While Keevoro looks through a source it now shows how many files it has looked at and the folder it is in at that moment, under the count of photos and videos found.

Changed

  • Looking through a source is much faster. Programs, documents, music and other files that are never a photo or video are passed over by name without being opened, and the files that might be are read several at a time. A whole computer's disk, which is mostly not photos, gains the most. A photo saved under a name like .txt or .exe is no longer found; files with unfamiliar endings or none are still opened and checked.
See this release on GitHub

Version 0.9.0

16 November 2026Also on Mac

Added

  • The app updates itself. When a newer Keevoro is out, a bar across the top says so. "Update now" downloads it, checks it is exactly the file that was published, and installs it; on Windows Keevoro closes and reopens by itself, and on a Mac the new disk image opens ready to drag across. "What's new" shows the release notes and "Later" puts it off. Your library is not affected. This starts working from this version onwards, so install this one by hand one last time.
See this release on GitHub

Version 0.8.0

16 November 2026Also on Mac

Added

  • Remove a source. Each source on "Where are your photos?" now has a Remove button. It only takes the source off Keevoro's list: nothing in the source itself is changed or deleted, photos you have already gathered stay in your library, and you can add the source again whenever you like.

Fixed

  • Folders on Windows are shown the ordinary way (C:\Users\...) without \\?\ in front.
  • A source with one file says "1 photo or video", not "1 photo and video".
See this release on GitHub

Version 0.7.0

16 November 2026Also on Mac

Added

  • Plugged-in drives are offered by name. "Where are your photos?" shows your USB sticks, external drives and memory cards as large buttons, so you no longer need to find a drive in a folder window. "Choose a folder" is still there for anywhere else.
  • "Show me my photos" opens your library folder once the photos are gathered.

Changed

  • The app is now four steps, one question at a time. Find your photos, Choose what to keep, Gather them, Back them up. The steps down the side are the only navigation, each screen asks one thing, and one button at the bottom always takes you on. The Discover and Archive screens are gone; everything they did is in the step where you would look for it.
  • No question before you start. Your photos are gathered into a folder called Keevoro Library in your Pictures; a small link lets you put it somewhere else.
  • Keeping a collection is a switch that says "Keeping" or "Leaving out", in place of a button whose wording changed.
See this release on GitHub

Version 0.6.1

16 November 2026Also on Mac

Changed

  • The app now shows you where you are and what to do next. Four steps run across the top (Add a source, Choose what to keep, Gather, Back up) with the one you are on picked out, and Discover always has a bar at the bottom with the next thing to do, such as "Gather my photos". You no longer have to find that button on another screen.
  • The first screen explains how Keevoro works in four short steps before asking where your library should live, and says what a library is.
  • Discover says how choosing works: everything is kept unless you say otherwise, and you can click a collection to look inside.
  • The Archive screen labels gathering and backing up as steps 3 and 4, and explains that backing up comes after gathering.

Fixed

  • The large collage on Discover shows its photos side by side again. In 0.5.0 and 0.6.0 they were stacked one above another.
See this release on GitHub

Version 0.6.0

16 November 2026Also on Mac

Added

  • Back up from the app. Once your photos are gathered, the Archive screen offers a second copy somewhere else: another disk, or cloud storage of your own (Cloudflare R2, Amazon S3, or another service that works the same way). Keevoro checks the storage works before remembering it, keeps the keys in your computer's keychain, and never replaces an original that is already backed up.
  • Check your backup from the app. One click re-reads every original in your library and confirms each one is in the backup.
See this release on GitHub

Version 0.5.0

16 November 2026Also on Mac

Added

  • Open a collection in the app. Click a collection to see every photo in it, and click any photo to leave it out or put it back.
  • See what was set aside. The app now shows the pictures it set aside as probably not memories, with the reason for each, and one click keeps any of them after all.

Changed

  • The places Keevoro looks are now called sources throughout the app and the command line, in place of "old drives". A source can be a drive, a USB stick or a folder.
See this release on GitHub

Version 0.4.0

15 November 2026Also on Mac

Added

  • The first version of the desktop app. Keevoro now has a window. It asks where your library should live, shows what it finds on a drive as collections with large photos, lets you keep or leave out each collection with one click, and gathers what you kept while showing how far it has got. It is early: backing up is still done from the command line, and the app does not yet update itself.
  • Installers for the app. Each release now includes a Windows installer and a macOS disk image for the desktop app, alongside the command-line program.
See this release on GitHub

Version 0.3.0

15 November 2026

Added

  • Choose single photos. keevoro photos lists what is in a collection, each with a short code, and keevoro skip --photo or keevoro keep --photo leaves one out or puts it back.
  • Keep something that was set aside as junk. keevoro photos --junk shows what was set aside and why. Keeping one brings it back into its album.
  • Check your library and your backup. keevoro check reads every original again and confirms it is exactly as it was when gathered, so a failing disk is noticed while a good copy still exists. Add --backup to confirm every original is in the backup, and --read-back to download and compare each one.
See this release on GitHub

Version 0.2.0

15 November 2026

Added

  • Videos get a poster. Gathering now makes one still picture of each video for a gallery to show, chosen from the opening so it is not a black first frame.
  • Old videos can be made to play everywhere. keevoro gather --convert-videos makes an MP4 copy of videos in older formats (AVI, WMV, MPG, 3GP and the like) so they play on any phone, TV or browser. Videos that only need rewrapping are repackaged without re-encoding, so nothing is lost. Every copy is checked: it must be the same length as the original and play through cleanly, or it is thrown away. Your originals are always kept, and modern MP4s are left exactly as they are.
  • Videos appear properly in the index. Each one now carries its length, its size, and where its poster and MP4 copy are.
  • Change your private link. keevoro publish --new-link writes the index under a new random name and removes the old one, so a link you have shared stops working.
  • Previews for camera RAW files. Photos in RAW formats (CR2, NEF, ARW, DNG and others) now get a thumbnail and viewing copy, made from the finished picture the camera stores inside each file. The RAW file itself is kept untouched.
  • Connect your storage once. keevoro connect checks your storage works, saves the keys in your computer's own keychain and remembers where the library is backed up. After that, keevoro publish needs nothing else. keevoro disconnect forgets it again.
  • Try missing previews again. keevoro gather --retry-previews has another go at files that had no preview, which is worth doing after an update.

Posters and conversion use ffmpeg, which needs to be installed on the computer. Without it your videos are still gathered and backed up; Keevoro tells you what was skipped.

See this release on GitHub

Version 0.1.1

15 November 2026

Fixed

  • keevoro update works behind office and school networks. Some networks pass traffic through a proxy that uses its own security certificate. Keevoro now trusts the same certificates your computer does, so updating no longer fails there with a certificate error.
  • Problems are reported once, in plain words. A failed command no longer prints "Error:" followed by a technical trace.
See this release on GitHub

Version 0.1.0

15 November 2026

Added

  • Find every photo and video on an old drive. keevoro scan looks through a drive or folder without changing anything on it. It recognises photos and videos by what is inside the file, not by its name, so renamed files are still found, and it skips system and program folders.
  • Dates worked out from every clue. The camera's own record comes first, then the recording time inside videos, then dates in file and folder names. Each date remembers where it came from, so a weak guess is never passed off as certain.
  • Your folders become your albums. Holidays/Spain 2009 stays Holidays / Spain 2009. Camera folders such as DCIM and 100CANON, and wrappers such as "Backup of C", are left out of the names.
  • Collections you can read at a glance. Photos with no useful folder are grouped into moments by date ("August 2008"), alongside your named albums.
  • Duplicates are kept once. The same photo on three drives counts once, and the copy that was filed most carefully decides where it goes.
  • Junk is set aside, not hidden. App icons, game artwork, browser leftovers and pictures under 300 px are listed separately with the reason, and left out of your collections.
  • Apple Photos and iPhoto libraries are understood. Keevoro takes the originals and ignores the thumbnails and caches. Old iPhoto event names are kept as albums.
  • A library that remembers your drives. keevoro scan --library records what was found, so keevoro collections and keevoro sources work after the drive has gone back in the drawer.
  • Choose what to keep. keevoro skip leaves a collection out and keevoro keep puts it back.
  • Gather your photos into one place. keevoro gather copies what you kept into the library and reads every copy back to prove it matches the original. Nothing is ever overwritten, it checks there is room first, and it carries on where it left off if interrupted. Your old drives are only ever read.
  • Thumbnails and viewing copies. Gathering makes a small and a large preview of each photo, turned the right way up. Location and camera details in your originals are never copied into them.
  • Back up to another disk. keevoro publish --to-folder copies the library to an external drive or network share. An original already in the backup is never replaced.
  • Back up to Cloudflare R2 or Amazon S3. keevoro publish --to-r2, --to-s3 or --to-endpoint. Keevoro checks your keys work before sending anything and warns you if strangers could list your bucket.
  • An index of every backup. Each backup ends by writing one file that lists every album and photo, under a long random name that cannot be guessed, plus a gallery.json for the existing gallery site.
  • Install in one line, update in one command. A one-line installer for Windows, macOS and Linux, and keevoro update to move to the newest version. Every download is checked against the release's checksum before it is installed. Keevoro only contacts the internet for this when you ask it to.
See this release on GitHub